Supported Devices
This library supports controlling the following devices:
Name |
Description |
Product ID |
Channels |
|---|---|---|---|
ECU-P8 v1.0 |
8 channel ECU-P with additional 16 digital outputs per channel, analog input and a configurable voltage source. It can measure the actuator current, voltage and resistance, allowing for self-sensing closed-loop control. |
0x35 |
8 |
ECU-P8 v1.1 |
0x36 |
8 |
|
ECU-P1 v1.0 |
1 channel ECU-P as an PCB-mountable module. It only offers I2C communication, no USB. It can measure the actuator current, voltage and resistance, allowing for self-sensing closed-loop control. |
0x86 |
1 |
ECU-P1 v1.1 |
0x87 |
1 |
|
ECU-PCON-mp6quad |
Interface to Bartels Mikortechnik Highdriver4 piezo pump driver. It gives full control of up to 4 mp6 pumps. |
0xA1 |
4 |
ECU-PCON-mp6single |
Interface to Bartels Mikortechnik Highdriver4 piezo pump driver. It gives full control of up to 4 mp6 pumps. |
0xA9 |
1 |
ECU-PCON-ABP2LAN |
Single pressure sensor. |
0xB1 |
0 |
ECU-PCON-SLF3 |
Interface to Sensiron liquid flow sensors. |
0xB9 |
0 |
ECU-2I15-10 |
2 channel ECU-P with USB and I2C communication. It can measure the actuator current, voltage and resistance, allowing for self-sensing closed-loop control. |
0xE7 |
2 |
ECU-2I15-11 |
0xE7 |
2 |
|
ECU-P2 |
0xE8 |
2 |